AMTECH NC-559-V2-TF no-clean tacky flux for hand-soldering Tin/Lead - 10g syringe kit

Key features

• Rosin-based, low activity no-clean tacky solder flux specifically designed for hand-operations with leaded alloys - manual Sn/Pb rework, stencil hand-printing and tin/lead BGA reballing. Suitable for any level of training, with any basic, readily available amateur soldering tools. Fills the workspace with distinctive pleasant pine scent - has been a prime choice for electronics and automotive repair industry for a decade.
• Mighty action - a noticeable booster for copper ions while wicking the workspace. High temp - quickly breaks-up lead-free joints for further leaded repair without losing properties (up to 300°C/600°F). Exceptional wetting - takes over tin/lead alloy, puts an operator in control. Excellent tackiness - holds components in-place allowing easy repositioning using technics like "dancing" a component with hot air. Long process window - continue a project later, once heated the flux will flow again.
• Optimal viscosity - 36-48 (Malcom @ 10 RPM/25°C (x103mPa/s)) allowing smooth flow from a syringe. Halide-free (<0.05%). Surface insulation resistant. No copper mirror breakthrough. Low electrochemical migration (<1 decade drop). Loaded with fire-retardant properties step-activated as heat increases - soldering Sn10/Pb88/Ag2 is no different from Sn63/Pb37 although alloys operate within 100°C difference.
• ROL0 classification - non-corrosive, doesn't short components, can be left on board for multiple SMT assemblies (manufacturer recommends cleaning all flux residues at all times to avoid board contamination or voltage leakage on circuits with high impedance, also non-activated residue may absorb moisture from air and subsequently cause corrosion). Clear residue can be easily removed with hot air, foam swab and basic solvents like d-limonene or isopropanol.
• Industrial air-syringe intended for professional use with pneumatic dispensing machines, do not remove the piston stopper! Do not discard original nozzle cap, tighten the cap while not using the flux - flux may dry out upon extended contact with air. Use supplied dispensing tip and plunger to manually control the flow. Keep in a room temperature - do not refrigerate. Genuine product made in the USA by AMTECH MANUFACTURING LLC, every original shipment includes AMTECH Soldering Profiles card.