Blisstime Pendulum Clock Movement Mechanism Replacement, DIY Clock Motor Kits with Hands - 1/2 Inch Maximum Dial Thickness, 9/10 Inch Total Shaft Length

Key features

• ★ Good Choose for You DIY or Repair : ★ Our pendulum clock mechanism set with pendulum clock movement, rubber washer, brass washer, hex nut, hour & minute & second hands and black end cap. Perfect clockworks for designing new clocks or to replacement the motors on old clocks!
• ★ Pendulum Clock Mechanism Shaft Length : ★ 14.6mm/0.57in threaded shaft, total 23mm/0.9in including the hand stem, suitable for 9-13mm/0.35-0.50in thickness clock panel.
• ★ Size of movement and hands : ★ Movement Size--56mm x 110mm x 22mm(case thickness) / 2.2” x 4.3” x 0.87”(case thickness) ; hour hand--68mm/2.7” ; minute hand --98mm/3.8” ; second hand--100mm/3.9” (the size of hands are from center of mounting hole to end tip. )
• ★ Two Style & Easy to Install : ★ Our clock set with second hand and black end cap for your choose. If you use the second hand, then do not need to install the black end cap on clock. It’s very simple to install, please check our third product picture!
• ★ TIPS : ★ Please gently press the clock hands onto shaft at 12:00 position or they will be bent; Keep the clock hands parallel; Kindly tear off the protective film on the clock hands; Only use 1.5V AA battery (not included).