Bonbo 7-141 Body and Cab Mount Bushing Kit for Chevy Silverado & Sierra 1500/2500 2WD/4WD 1999-2014 Polyurethane Body Cab Mounts Black

Specifications

About this product

Wide Application: Fits for Chevrolet Silverado 1500 2WD - 1500 - 1999 - 4WD - 1500 - 2014Fits for Chevrolet Silverado 2500 2WD - 2500 - 1999 thru 4WD - 2500 - 2014Fits for Chevrolet Silverado 2500 HD 2WD - 2500HD - 2001 thru 2WD - 2500HD - 2006Fits for GMC Sierra 1500 2WD - 1500 - 1999 thru 4WD - 1500 - 2014Fits for GMC Sierra 2500 2WD - 2500 - 1999 thru 4WD - 2500 - 2004 Installation Instruction: 1. Spray all mounting bolts and nuts to be removed with penetrating oil.2. Place the vehicle body properly before removing mounts. (It is recommended that using a 2" x 4" piece of wood 24" long or any other suitable size wood between the jack and body panel to distribute the load, preventing any damage of the body panels.) If necessary, support the body in multiple areas.3. Loosen all nuts and bolts but DON’T remove them. Work from one side of the vehicle at a time. Remove the nuts and bolts from one mount location and raise the body enough to replace the mount, NEVER HIGHTER. When raising the body, carefully check the interference problems in other parts.4. Take one mount at a time with similar size urethane mounts. If washers/sleeves have been provided, use the original parts for installation.5. After replacing all mounts, tighten all nuts and bolts to factory standards. (ATTENTION PLEASE: Re-tighten all nuts and bolts after initial installation of mounts (approximately 1000 miles of driving) to ensure that all parts are not becoming loose.)