BQLZR White Toilet Cistern Dual Flush Push Button Valve 25cm Height Fit for Drain Diameter 65-75mm

Key features

• This item is only applicable to 65mm-75mm (2.56inch-2.95inch)Toilet tank hole Diameter. The maximum drainage hole is 78mm, and it cannot be used if it exceeds it.
• Measure the height of the water tank without lid: Height Should Be 26cm-29cm (10.24inch-11.41inch),Please measured From the Inside of the Water Tank, otherwise , it won¡¯t fit.
• Tips: please check the size in the second image before buying。Before buying, please measure the opening at the bottom of the toile tank and compare it to the diameter listed for this item.It has two Flush Buttons on top (high/low), so it would depend on your toilet tank lid depression pin alignment to this flush device as to which button would get depressed (maybe neither). Bigger question is whether the bottom nut and gasket are the same size as what toilet tank has.
• This toilet valve is not suitable for Glacier Bay.Easy to install, just remove your toilet tank from the toilet as it has a center shaft that goes through the bottom of the toilet tank and a large wing nut that can be screwed onto it to connect it to the toilet tank
• it replacement for OEM. need to adjust the plunger rod on the button for proper travel adjustment. This unit is slightly taller than Replacement for OEM parts, need to trim the stem a bit