BTF-LIGHTING WS2812B WS2811 2.4G WiFi Music SP511E SPI Controller Google Home/Alexa Timer Mode with Dual Signal Output 900pixels/port for LED Module Pixel Strip Light APP/3Key Button/IR Remote Control

Key features

• Updated Technology.Will be updated to musical SP511E (IR remote+2.4GHz WiFi APP+Google Home/Alexa+Built-in Mic) It's no longer the traditional Alexa/Google home LED strip controller.8 kinds of dynamic chasing effect are predesigned,you can switch these chasing effects at will with Alexa voice control.Traditional technologies are also retained,voice control monochrome effect ,brightness,turn on/off.
• Multiple functions. 1.Timer fuction,turn on/off the LED strip on time every day.2.APP fuction,you can control the LED strip whenever and wherever you like via APP in 2G/3G/4G/WIFI network.3.Mark fuction.You can mark the lighting effect you like.4.Auto playing fuction,you can set the app automatic loop play the chasing lighting effect. 5. STA mode. One APP can control lots of controller make sure connect the controller to your home 2.4G WiFi network.6.Adjust the LED strip RGB order
• Music Effects,Multiple Dynamic ,Static Effects.180 kinds of dynamic chasing lighting effect . 8 kinds of Alexa vocie control dynamic chasing lighting effect. 8 kinds of musical lighting effect.Countless kinds of stactic lighting effect.Mark 4 kinds your favorite effect from dynamic . Mark 4 kinds of favorite effect form static . You also can switch freely between dynamic mode and static mode.
• 5.5mmx2.1mm DC power jack .Support FCOB RGB WS2811 IC，WS2812B ECO,UCS1903 ,SM16703,WS2811,WS2812B,6803 etc all the single data smart IC chip. Can not support SK6812RGBW 4 channels IC .3PIN Male Connector
• Drive 900 pixles/Port. This controller control 900 pixels/port max . The APP is Fairy Nest. This controller only support 2.4G WiFi network.Can't support 5.0G WiFi network. Only support 2.4GHz WiFi.If the WiFi is 2.4G/5.0G, please set the router to be divided into two WiFi, one is 5.0GHz and the other is 2.4GHz
• DC5V LED strip,Must use 5V power supply.For example LED strip is DC5V WS2812B , you must use DC5V power supply . The voltage depends on LED strips. Don't use DC12V power supply for DC5V WS2812B pixel strip.
• Color calibration. When the app color is inconsistent with the color of the LED strip, where green is blue and blue is green ，You can use the APP to calibrate the colors to make them consistent.
• Insufficient power supply will cause the controller to lose control, the color of the LED strip is frozen, remote cannot be used, and the WiFi is disconnected . Please note : When you Light up 1 color（red or green or blue or pure white) 0.1W/LED . 2 colors (red+green) 0.2W/LED , 3 colors (red+green+blue=mixed white) 0.3W/LED .If you don't know which power supply can be used for your LED project, you can email us.
• It is not recommended to light up the full brightness white light for a long time, because the main function of the addressable RGB IC light strip or fairy string is chasing rainbow effects .