CCTREE 3D Printer Filament PLA PRO 1.75mm Black,Dimensional Accuracy +/- 0.03mm, 1kg Spool(2.2lbs) Toughness PLA(ST PLA) Filament Vacuum Packaging Consumables, Fit Most FDM 3D Printers

Key features

• 🧵【FILAMENT SPECS】1kg (Approximately 2.2 lbs) Spool,1.75 mm Filament Diameter (Dimensional Accuracy +/- 0.03 mm), Fit Most 1.75mm FDM 3D Printers, For example, Ender 3/Ender 3V2, etc. and other FDM 3D Printers on Market.Multiple color options: Black/White/Glow in the Dark Green/Olive Green/Brown/Glow in the Dark Blue/Silver/Green/Sky Blue/Blue/Yellow/Red etc.
• 🧵【Tangle Free&No Plugging&No Bubbles】Clog/Bubble/Tangle/Warping/Stringing free, Easy to Use, Better layer Adhesion. ST PLA has a Melt Flow index of 4.3-4.8 (190°C/2.16kg) and an Advanced CCD Diameter Measuring and Self-adaptive Control System in the Manufacturing Guarantee these ST PLA Filament Minimum Tolerance and Low Warping to Ensure Consistent Feeding and Stable Prints, Good Layer Bonding, Less Stringing, No Bubbles, Easy Handling, Resulting in an Outstanding Surface Finish and have a High Successful Printing Rate
• 🧵【Printing Requirements】ST PLA has Higher Impact Strength, The IZOD Impact Strength of ST PLA is 162 J/M and Shore Hardness is 102A, More Suitable for Printing Products with High Impact Resistance Requirements.TEMPERATURE: Recommended Nozzle/Extrusion Temperature of 195°C - 225°C (383°F - 437°F) and Bed/Platform temperature of 50°C - 55°C (122°F - 131°F)
• 🧵【Toughness Enhanced PLA filaments】ST PLA has better Toughness, Higher Elongation at Break, Better Bending Resistance, Not easy to break for. The Tensile Strength of CCTREE ST PLA is 47.9, MPA is Better than the 34.3 MPA of other brands, The Elongation at a Break of 82% for ST PLA, the Tensile Modulus of ST PLA is 2870 MPA, the Flexural Modulus of ST PLA is 2520 MPA, the Flexural Strength of ST PLA is 70.7 MPA, Optimized printing quality with low shrinkage and superb layer bonding, meeting your demands for printing projects of functional parts with higher toughness
• ⚠️【NOTE】CCTREE PLA PRO 3D Printer FilamentComplete Drying before Packaging and Vacuum Sealed in Re-Sealable Bag. Warm Tips: ST PLA consumables will generate stress when winding, if over-drying will release the stress, the stress will destroy the consumables, and the consumables will become brittle and break, so if there is a vacuum bubble during the printing process, you can partially dry, if the Material is Printed without Problems, please don't do drying measures