K-Catalog
Cycloving Wireless Bike Computer, Bicycle Speedometer with 2.8 Inch LCD, White Backlight, IPX6 Water Resistant Odometer Bike Accessories
  • Cycloving Wireless Bike Computer, Bicycle Speedometer with 2.8 Inch LCD, White Backlight, IPX6 Water Resistant Odometer Bike Accessories
  • Cycloving Wireless Bike Computer, Bicycle Speedometer with 2.8 Inch LCD, White Backlight, IPX6 Water Resistant Odometer Bike Accessories
  • Cycloving Wireless Bike Computer, Bicycle Speedometer with 2.8 Inch LCD, White Backlight, IPX6 Water Resistant Odometer Bike Accessories
  • Cycloving Wireless Bike Computer, Bicycle Speedometer with 2.8 Inch LCD, White Backlight, IPX6 Water Resistant Odometer Bike Accessories
  • Cycloving Wireless Bike Computer, Bicycle Speedometer with 2.8 Inch LCD, White Backlight, IPX6 Water Resistant Odometer Bike Accessories

Cycloving

Cycloving Wireless Bike Computer, Bicycle Speedometer with 2.8 Inch LCD, White Backlight, IPX6 Water Resistant Odometer Bike Accessories

See current price

Check the current price and availability on Amazon.com.

View on Amazon

Affiliate link — we may earn a commission at no extra cost to you. Learn more

Screen Size
2.8 Inches
Display Type
LCD
Sensor Type
Speed Sensor
Battery Cell Composition
Lithium Manganese Dioxide

Key features

  • ✔LARGE & EASY TO READ - 2.8 Inch LCD display and the numbers are big enough to read. Large screen with white backlit LCD provides high visible during the day and night( "KM" and "M" Optional ,push right key when turn on or reset)
  • ✔MULTIFUNCTION - Cycle Odometer has all the basic functions, memory function, automatic wake-up, 2 users data recording, SPD, AVS, MXS, ODO, DST, clock, temperature, etc
  • ✔AUTOMATIC WAKEUP - Cycling computer Built-in steel ball switch to achieve automatic wake-up function, so when you shake the bike computer, you could hear the steel ball shaking
  • ✔INSTALLATION & RESTRICTIONS - Installing distance requires no more than 60cm or 23.62 inch from the bike computer to the sensor, so the sensor must be installed onto the front fork of the bicycle; magnet has to be very close to the sensor, the gap between the front fork and the spoke should be less than 2.2 inch, so is not suitable for large sized fork
  • ✔ABOUT SETTING - Only take off the battery to shut down computer; set right weight setting for Kilogram K or Pound L, and set tyre circumference or perimeter comparison for your bicycle, otherwise distance, calories burned are not correct

Specifications

BrandCycloving
Screen Size2.8 Inches
Display TypeLCD
Sensor TypeSpeed Sensor
Battery Cell CompositionLithium Manganese Dioxide
International Protection RatingIPX6
Human Interface InputButtons
Item Package Dimensions L x W x H4.1 x 2.9 x 2.4 inches
Package Weight0.16 Kilograms
Brand NameCycloving
Materialplastic
ManufacturerCycloving
Part NumberC28
ASINB07DQGFP3W

About this product

Are you troubled with a small screen bike computer? That's exactly why we recommend you this 2.8 inches large screen Wireless bike Odometer, IPX6 weather-resistant, easy to read with big numbers and white backlit. Note: 1. Open the battery case with a coin and install the CR2032 battery, when the bike computer turns on, but speed is at 0, u should let the computer rest for a while for about 10 or 20 minutes, then the computer system will find the sensor singal after rest. (please check distance based on photos or manu)2. The bike computer and the sensor contain CR2032 button cell battery. (take off the insulation sheet in the speedometer) 3. About setting wheel, picture 1 shows the tire circumference corresponding to the standard tire size in user manual. You can also measure it by yourself by the following ways if you bike tire size not in picture 1, to measure the height of your tire in inches, multiply by 3.14, and then convert to mm. this will be what you enter for Wheel I and Wheel II. 4. Installing distance requires less than 60cm(23.62 inch) between computer and sensor, sensor must be on the front fork .the distance between magnet (on spoke) and sensor should in 3mm 5. Magnet has to be very close to the sensor, the gap between the bike front fork and the spoke less than 2.2 inch, so not suitable for large sized fork, like recumbent bike, spinning bike, 26 inch Schwinn cruiser bike with coaster brake, fat bike 4 inch rim. 6. Mount suitable for most bicycles 25-31.5mm diameter handlebar, you also could built up layers of rubber so it held on tight to the handle bar. 7. You could find the install video link in the Customer Questions & Answers 8. We provide the best customer service for you, please check the specification vedio to check how to use . and touch key smoothly better. please make sure install and use mby manu ,any problem you can contact us online .,we must help you best .

Similar products

See current price

View on Amazon