DOMINOX Propane Torch Head, Propane Torch Head with Lgniter, Mapp Gas Torch - Torch Head - Propane Torch for Cooking, Welding, Searing(Tank Not Included)

Key features

• 🔥【SIMPLE & FAST OPERATION】: Propane Torch Head is designed with Piezo Ignition Switch (If the ignition is not smooth, please reduce the gas with Regulator Valve and try again). Just connect to the CGA600 propane cylinder, such as Coleman fuel, propane/MAPP/MAP/MAP PRO fuel. Or connect the standard CGA600 interface hose to the propane tank. The installation steps are very simple and convenient.
• 🔥【ADJUSTABLE FLAME】: Mapp Gas Torch allows accurate flame adjustment after Piezo Ignition. Propane gas regulator valve can be turned on before use and can be turned off the flame after use. We suggest turning on the gas regulator valve slowly, ignite at low flow, and then increase the flow (Most of the reasons for the failure to ignite are due to the excessive flow of propane). It is highly recommended to ignite and work with propane cylinder at room temperature.
• 🔥【APPLICATIONS】: Propane Torch Head can be used with propane cylinders or tanks (NOT INCLUDED) for most projects, such as small diameter soldering, soft soldering in brazing copper tubing, heating installation, hard soldering in refrigeration installation, loosen rusty bolts, thaw frozen padlock, remove paint and tiles, plumbing, air-conditioning, automobile repair, jewelry making, DIY crafts, cooking and grill, camping and many other home and commercial purposes.
• 🔥【HIGH QUALITY MATERIAL】: Torch Head nozzle is made of stainless steel, which is resistant to high temperature. The bottom is made of 100% brass for solid and tight connection to the propane gas cylinder.
• 🔥【PORTABLE】: Propane Torch Head is suitable for daily carrying and use. Propane Torch is convenient for storage when do not use, do not take up redundant space.
• 🔥【NOTICE】: It’s forbidden to use it upside down (It may cause unstable flame or block the propane torch with gas impurities), the maximum tilt angle of the propane gas cylinder is 60°. We suggest turning on the gas regulator valve slowly, ignite at low flow, and then increase the flow (Excessive gas flow may cause ignition failure. 1/3 turn counterclockwise to start is recommended. It may vary depending on the cylinder pressure).