DONOTAG T-Post Puller Fence 36 in Post Puller

Specifications

About this product

Read before using: This post puller is not designed to lift free objects. It is unstable when used this way and could cause injury. Beware of pinch points that can occur between the handle and base shaft while moving or handling. This puller will not stand upright unless attached to a post or properly secured. Take care when storing that it does not fall. Instructions: 1.Stand the post puller upright with the handle near waist height. 2.Put the T-post lock around a stud on the T-post(note that the hook can be used with 1/4” chain for posts that are not T-type) 3.Push handle down to pull T-Post upward. 4.This process is repeated by raising the handle back up and fitting the T-post lock around a lower stud, then pushing the handle down to pull the post further out of the ground ,until the post is free. 5.Periodically check that hardware is secure and lubricate between handle and shaft with light oil Product size: 36 in. Use for pulling T post straight up from ground. Include a pair of gloves. Item Weight: 13pounds Package: 37 x 7.7 x 5.9 inches SIZE: 36in.