FicBox
FICBOX 50PCS Cutting Blades Replacements 45°Standard Cut Vinyl Fabric Lettering Blades
See current price
FICBOX CB09 Graphtec Cutting Blade Holder Base with 21pcs (30/45/ 60 Degree) Vinyl Cutter Plotter Cutting Blades for Silhouette Cameo
See current price
Check the current price and availability on Amazon.com.
View on AmazonAffiliate link — we may earn a commission at no extra cost to you. Learn more
- Item Weight
- 3.2 ounces
- Manufacturer
- FICBOX
Key features
- 【Package Include】1*Blade Holder; 7*30 Degree Cutter Blade (Yellow Cap); 7*45 Degree Cutter Blade (Red Cap); 7*60 Degree Cutter Blade (Blue Cap)
- 【Compatibility】Compatible with Graphtec CB09U,can be ideal replacement for Silhouette cameo (1/2/3)/portrait /curio and Graphtec 6000/CE 5000 -60 Plotter
- 【Cutting Material】Made of carbide materials, ultra-hardness, super toughness, more wear and edge grinding wheel with ultrafine polishing, edge sharper
- 【Application】 30 degree blade should be recommended for fabric, thin cardboard and leather; 45 degree blade used for most general purpose cuts; 60 degree blade does the most intricate and delicate cuts
- 【Wide Usage】The Hard Alloy Cutter Blades are with fine polishing process, suitable for mahogany, vinyl sheet,wood,silhouette cameo, faux leather,PVC color board, MDF and other precision relief.
Specifications
| Package Dimensions | 6.3 x 3.8 x 0.6 inches |
|---|---|
| Item Weight | 3.2 ounces |
| Manufacturer | FICBOX |
| ASIN | B07PLMK4Z4 |
About this product
Product Specification: Length of Holder: 51.8mm Length of blade: 12mm Diameter (Clamp): 11.5 mm Diameter (Blade): 0.09 mm Material: Blade Holder: high quality aluminium; Point of Blade: high hardness alloy Degree of Blade: 30 degree(Yellow Cap); 45 degree (Red Cap); 60 degree (Blue Cap) Application: 30 degree blades: Cutting very small font & intricate line-art logos.(eg: any thin vinyl) 45 degree blades : Cutting general fonts, vinyl film.(eg: vinyl for traffic sign, flocks, etc.) 60 degree blades: Cut large fonts, thick materials for about 1mm. (eg: reflective material, masking tapes, etc.) Notice: 1. Blade should not extend too long, generally within half a millimeter is better, while paying attention to extended blade longer properly when carve the small print, in order to avoid the blade holder take the carved strokes away. Suitably engraved small print with new cutter and slow down. 2. When the word carved with angular phenomenon, you should change the blade to eliminate the problem, if the phenomenon persists after change blade, it should be the holder problem. 3. When problem arise the blade holder, try a drop of oil in the bearing and rotate the blade several times to lubricate, if still unresolved, consider replacing the blade holder. Package Included: 1 x Blade Holder 7 x 30°Cutting Blade 7 x 45°Cutting Blade 7 x 60°Cutting Blade
Similar products
See current price