K-Catalog
Master Magnetics - B005HYDC68 Roll-N-Cut Flexible Magnetic Tape Refill - 1/16" Thick x 1/2" Wide x 15 feet. (1 roll), 07518
  • Master Magnetics - B005HYDC68 Roll-N-Cut Flexible Magnetic Tape Refill - 1/16" Thick x 1/2" Wide x 15 feet. (1 roll), 07518
  • Master Magnetics - B005HYDC68 Roll-N-Cut Flexible Magnetic Tape Refill - 1/16" Thick x 1/2" Wide x 15 feet. (1 roll), 07518
  • Master Magnetics - B005HYDC68 Roll-N-Cut Flexible Magnetic Tape Refill - 1/16" Thick x 1/2" Wide x 15 feet. (1 roll), 07518
  • Master Magnetics - B005HYDC68 Roll-N-Cut Flexible Magnetic Tape Refill - 1/16" Thick x 1/2" Wide x 15 feet. (1 roll), 07518
  • Master Magnetics - B005HYDC68 Roll-N-Cut Flexible Magnetic Tape Refill - 1/16" Thick x 1/2" Wide x 15 feet. (1 roll), 07518

Magnet Source

Master Magnetics - B005HYDC68 Roll-N-Cut Flexible Magnetic Tape Refill - 1/16" Thick x 1/2" Wide x 15 feet. (1 roll), 07518

See current price

Check the current price and availability on Amazon.com.

View on Amazon

Affiliate link — we may earn a commission at no extra cost to you. Learn more

Item model number
7518
Manufacturer
Magnet Source
Country of Origin
Vietnam
Domestic Shipping
Currently, item can be shipped only within the U.S. and to APO/FPO addresses. For APO/FPO shipments, please check with the manufacturer regarding warranty and support issues.

Key features

  • Magnet designed to hold on one side only, directly to flat, magnetic receptive steel surface. Multiple poles are spread evenly across its surface to reduce sliding. It is not recommended for use with other magnets
  • Magnet holds up to 6 pounds per linear foot on contact with a flat, smooth and uncoated receptive steel surface. For best results, do not cut magnet shorter than 2 inches
  • Magnet is not intended for use with a with a sheet of paper or other material between the magnet and the attracting surface
  • The adhesive is on the non-magnetic side of the magnet, and is covered by peel-off liner. The adhesive is permanent, pressure-activated acrylic with initial tack. It requires a minimum of 24 hours to properly set
  • The adhesive bonds to clean, smooth and uniform surfaces made of paper, wood, stainless steel, painted steel, aluminum, interior glass, and rigid plastics

Specifications

Product Dimensions10 x 5 x 5 inches; 10.72 Ounces
Item model number7518
ManufacturerMagnet Source
Country of OriginVietnam
Domestic ShippingCurrently, item can be shipped only within the U.S. and to APO/FPO addresses. For APO/FPO shipments, please check with the manufacturer regarding warranty and support issues.
International ShippingThis item can be shipped to select countries outside of the U.S. Learn More
ASINB09Q68BRY5

About this product

Perfect for making flat lightweight items magnetic. Magnet requires direct and full contact with steel for maximum hold, therefore it is best to make sure that magnet is flat. Magnet & adhesive work best when applied at above 60 degrees Fahrenheit or 15.56 degree Celsius. For best results: 1)Allow magnet to reach room temperature then cut magnet with heavy duty scissors or hobby knife. 2)Apply magnet's dark gray side to large metal surface for several hours to flatten curl. Do not roll magnet strip in opposite direction to remove curl. 3)Clean applicable surface for adhesive with isopropyl alcohol and allow to dry. 4)Peel back liner from the adhesive and place item on adhesive. 5)Apply adhesive to surface with firm pressure 6)Allow adhesive to cure for a minimum of 24 hours or 72 hours to reach maximum bond with surface.

Similar products

See current price

View on Amazon