Master MST-101 Automotive Electronic Faults Detector Ignition Coil Tester

Specifications

About this product

Variety of detection: Coil(traditional coil, double spark coil, dingle spark coil). Electric generator, inside fan motor, combination valve(heating, water cooling) Emission controling valve, fuel injector, spark plug, hall sensor, electric relay Instructions: 1) put the detector pen to the electric components to test, there will be corresponding voice signal and LED flashes to show the park if it is working fine. 2) The 2 sides has different sensitivity of the top on the detector can test different electric lines. 3) Hold the detector pen to the coil of the line to get precise testing results. 4) There are modes switch on the detector pen. LevelII is used for normal test, levelIII is used for strong magnetic field test. Safe Operations: 1. The car to be tested should park at an area with good air condition, can not suck into exhaust emission from engine 2. The car to be tested should be far away from smoke and fire source;The gasoline engine and chargeable battery is possible to occur explosive air, so it is very necessory to prepare fire extinguish gears accordingly. 3. During test process, it is necessory to avoid the moving parts and heat source to protect tester and testing equipments. 4. To be far away from the cooling fan of engine 5. Do not put other equipments on the battery which is possible to make the battery inside to be Short, which may cause hurt or damage of tester and equipments. 6. Do to turn off the ignition switch before connecting or remove electrical parts. 7. Do not leave the car during the test 8. Please confirm the gear position of the car : automatic is at P; manual is at blank; Do push tight of manual brake ; put blocks before the driving tyres Package including: 1pc x Automotive Electronic Faults Detector MST-101