MAXLANDER 40V Cordless Brushless Chainsaw 16 Inch Electric Battery Powered with 4.0Ah Lithium Battery and Charger Quiet Auto-oiling Tool-less Tensioning

Key features

• 【POWERFUL 】The brushless motor produces as much power as a gas operated chainsaw. Cutting a 4x4in lumber within 8-9 seconds.The 8000RPM spin rate makes ML8J116 be ahead of mainstream competitors by 2-3 times.
• 【HEAVYDUTY】The brushless motor has a lifesapan for more than 10 years, while the motors with brush only have very limited times of usage before being scarpped.The main body of this chainsaw is also made of hard-wearing materials to match the long-lasting lifespan of the motor.
• 【LESS NOICE】When gas powered chainsaws make noices at an average volume of 112db, the battery powered chainsaw only produces less than 96db noices at the same power gas chainsaws while in operation. The brushless motor and the rubber-coated handle also reduce the vibration to bring more comfortable grips.
• 【HASSLE-FREE】16-Inch battery chainsaw is adopted with the advanced auto-oiling system and the tool-less tensioning technology. The 6.34oz extra large sized lube oil tank to lessen the frequency of oil-filling, while the tension of the chain can be adjusted by just turning the knob. Cordless chainsaw is also easy to assemble and dismantle to make new users easy to master without any additional tools.
• 【Tip 1】When installing the chain and guide, please make sure the side screws are screwed to the proper position. The gap between the chain and the guide plate should be kept properly, 3-5mm, not too tight or too loose, otherwise it will affect the use.
• 【Tip 2】The size of the chainsaw is 16inch, it is recommended that the size of the wood cut should not exceed the size of the chainsaw, otherwise it will cause damage to the machine and affect the work.
• 【Tip 3】Built-in thermal protection device that automatically shuts down when the machine is overheated by continuous operation and can only be used after it has cooled down, so it is recommended that you avoid over-running the machine (e.g. pressing down hard on the machine), which may cause overload and damage the machine.