Pokin Motorized Lower Nozzle Hose, 6" x 1.25" ID, for Shark Rocket HV300, HV302 Vacuum Hose Black - 2Pack

Specifications

About this product

Pokin Replacement Floor Lower Nozzle Hose Compatible with Shark HV300, HV302, HV320, HV321, HV322 Rocket Vacuum Specification: 1.Flexible Extension Made of high-quality plastic material, flexible and durable, have a long service life. 2.Suction Lower Nozzle Hose Regularly replaces the lower duct hose which can help filter the dust and keep your house clean. Suggest to replace your shark Rocket duct hose 6-12 months, which can help maintain the suction and life of your vacuum. Step by Step Installation for HV301： 1. First of all, you will detach its base from the handle. 2. Remove underside screws so you can disassemble base unit cover. 3. Do not use long screws in these location as they will break the fittings. For that, you must have to note that where the three short screws go. 4. Then what you have to do is to separate the gray cover from base unit. 5. You will remove cleaning bottom cover from the base and unlock it. 6. So, to separate the hose from the fitting, you will cut the hose in half then you will pull it and twist it at the same time. There is another way you can lift the hose. You can use needle nose pliers and twisting action. 7. By pulling up and out at the same time, you can easily remove black socket hose from the base. 8. Must use grease for the exterior ends of the hose. You can also use oil. 9. So, the hardest step is here now, you will have to screw the new hose into black socket fitting. You will be putting little pressure on the hose and twisting it at the same time. So, you can get the hose started into the socket. Repeat this until the hose is fully inserted into the socket. 10. Now you will be inserting the hose into other fitting, you will find