

Bosch Professional Stud Finder GMS 120 (Drill hole marker, max. detection depth wood/magnetic metal/non-magnetic metal/live cable: 38/120/80/50 mm, in cardboard box) - Amazon Exclusive Set
See current price
Check the current price and availability on Amazon.com.
View on AmazonAffiliate link — we may earn a commission at no extra cost to you. Learn more
- Color
- Blue
- Batteries Required?
- Yes
- Material
- Live cable, Metal
- Power Source
- Battery Powered
Key features
- 3 DETECTION SETTINGS: Metal mode is ideal as a metal detector, while Drywall and Live Wire modes are optimized to act as a stud detector and cable detector, respectively.
- SUITABLE FOR: Detecting objects to avoid drilling like when fitting a wall cabinet or heating system, or for finding objects to drill into such as detecting wooden studs to fit drywall.
- 3-COLOR INDICATOR: The LED ring around the center marking hole turns red for a detected object, yellow for a nearby object, and green when no object has been detected.
- DRILL HOLE MARKER: The included marker for drill holes is especially useful to mark the exact point where to drill. It features an extra-long and thin stainless tip for hard-to-reach areas.
- ITEMS INCLUDED (Amazon Exclusive): Stud Finder GMS 120, Drill hole marker, hand strap, protective bag, 1 x 9V battery.
Specifications
| Brand | BOSCH |
|---|---|
| Color | Blue |
| Batteries Required? | Yes |
| Material | Live cable, Metal |
| Power Source | Battery Powered |
| Product Dimensions | 29.33 x 10.04 x 4.53 inches; 9.52 Ounces |
| Item model number | GMS 120 |
| Manufacturer | BOZYC |
| ASIN | B09J229Q63 |
About this product
Bosch Professional Stud Finder GMS 120 The GMS 120 stud and wire detector can detect wood, magnetic metal, non-magnetic metal and live cables at depths of up to 38mm, 120mm, 80mm and 50mm, respectively. With the Center Finder, users can detect the center of objects in walls and mark the point using the marking hole. The LED ring turns red when an object is detected, yellow when an object is nearby, and green when no object has been detected. Three Detection Settings With three specialized detection settings, the GMS 120 can provide better results for specific applications. Metal Setting: The metal setting can be seen as the standard detection function for the wall scanner and is capable of detecting metal and live wires. When the tool is needed specifically as a metal detector, select the metal setting. Live Wire Setting: The live-wire setting is optimized to detect live wires. For safety reasons, all settings can recognize live-wires, but this setting is specialized for that application and therefore acts as a more accurate voltage detector. Drywall Setting: The drywall setting is specifically optimized to detect wooden and metal studs behind drywall and can be used specifically as a stud detector. This setting can also detect metal objects and live-wires, but the metal and live-wire settings are optimized for detecting those objects. For best results: Make sure voltage is applied to the cable being searched for (i.e. by turning on the light) Remove any metal jewelry and gloves Turn off or remove for nearby electronic devices which could interfere with detection Turn on the device and select the correct detection setting for the application Hold the cable finder firmly by the rubber grip Place the wall scanner flat against the wall and move it slowly 3x horizontally and vertically Items included: GMS 120 Drill hole marker Hand strap Protective Bag 1 x 9V Battery Cardboard box
Similar products


General Tools
General Tools Wood Moisture Meter MMD900 - Humidity Sensor - Pin Type / Pinless Device
See current price

Vayyar Imaging
WALABOT DIY 2 - Advanced Wall Scanner/Stud Finder - for Android & iOS Smartphones
See current price

Vayyar Imaging
WALABOT DIY 2 - Advanced Stud Finder and Wall Scanner for Android & iOS Smartphones
See current price
See current price
