Galaxy S10 Plus Screen Protector, (2 Pack) HD Tempered Glass Screen Protector ScratchProof/No Bubbles/ 9H Hardness/ 3D Full Coverage Compatible with Samsung Galaxy S10 Plus/ S10+ 5G

Specifications

About this product

If you have any questions, Pls contact the seller first. How to install the screen protector? 1. Take out the alcohol bag and wipe the screen to make the screen clean. If there is dust after wiping the screen, please use the dust sticker to remove it. 2. After wiping, pls take out the screen protective film, tear off it and slowly aim the screen downward carefully. Pls make sure that the protective film must be centered. 3. Push all around the screen to make the double-sided adhesive stick to the screen and press the edge of the screen protector for about 45 seconds to prevent the edge from lifting. 4. Long press the fingerprint identification circle to ensure its stickiness, no bubbles, and the high touch sensitivity of the glass screen fingerprint. Install Tips: 1.Because the fingerprint glue may stick to the screen. You need to scrape the fingerprint glue from left to right or right to left slowly. After scratching, the fingerprint glue will completely glued to the screen. 2.To make the function works perfectly, it requires the fingerprint to be pressed for 5 seconds to ensure its stickiness and no bubbles. 3. The most important step is to reset and enter a new fingerprint. Only after the new fingerprint is completely matched can it be unlocked more sensitively. 4.The glue is very strong, if you finished it but tear it up or try it over twice, the adhesive will be not so good. And what's worse, it will cause a crack due to the strong glue, because it is hard to be torn up.