InnoGear Microphone Stand, Desk Mic Stand Adjustable Boom Arm Stand with 3/8" to 5/8" Screw Adapter Mic Clip for Blue Yeti, Yeti Nano, Snowball and other Mic

Key features

• Height & Angle Adjustable: By rotating the height clutch, the height of stand is adjustable from 10.8 inches to 14 inches. The boom arm swivels and has a good range of motion. The included mic clip can be rotated by 180°. Easy to use and set up the height and angle you want.
• Lengthened Boom Arm: The telescoping boom arm is upgraded to two-section, compared to single-section arm of others on the market. The length of boom arm is adjustable from 16 inches to 28 inches. Sturdy, silent and great reach. Noted: When it goes to the max length, recommended to have the second pole remained 1 inch inside the boom arm.
• Enhanced Load-bearing: One 1.1lbs solid counterweight is fixed to one end of the boom arm, improving the load-bearing capacity. When the arm is at the min length of 16 inches, it reaches the max load of 6.6lb/3.0kg and when the arm is at the max length of 28 inches, it reaches the min load of 3.3lb/1.5kg. Strong enough to hold your microphone steadily while in use.
• Upgraded Table Mounting Clamp: With the mounting position of the stand in the center, the upgraded desk clamp could stably clip to any desktop up to 2.2 inches thick. The diameter of metal gasket is increased to 38mm to enlarge contact surface and further enhance stability. A rubber pad is built on the clamp to protect your table from scratches.
• Wide Compatibility: This mic stand fits for a wide range of microphones like Fifine K669B, Blue Yeti, NW-700, Blue Snowball, Audio-Technica AT2020, Audio-Technica AT2035, Razer Seiren X, Shure SM58, Shure PGA48, Shure SM7B and so on.