Laing LHB08100092 AutoCirc Recirculation Pump with Timer

Specifications

About this product

Product Description The auto circ pump is installed under the sink or faucet farthest from the water heater - where hot water usually takes the longest amount of time to arrive. A built-in temperature sensor automatically turns the autocirc pump on when the water temperature in the hot water supply line cools down to 85º F. This cool water in the hot water supply line is then pumped into the cold water line and back into the water heater. The autocirc pump turns off automatically when the hot water supply line to the faucet reaches a temperature of 95º F, ensuring the instant availability of shower warm water with maximum temperature hot water only seconds behind. When the pump is automatically turned off by the built-in thermostat, an auto closure device prevents hot or cold water from mixing in either supply line. Another beneficial feature is that hot water will also be instantly available at all other faucets in the supply line between the water heater and the faucet where the autocirc pump is installed. Does not require a return line. Requires only 14 watts of power. Packaged complete with a 6 ft. long power cord. Requires only one pump and one installation for all fixtures on the hot water plumbing line. Has built-in fixed thermostat. Has a built-in 24 hour timer which allows the selection of system operating periods to suit family usage. Saves the average family of four up to 17,000 gallons of water annually.. Long lasting, silent operation. Saves energy, money, water and pays for itself in a short period of time (see additional images for energy saving chart). No shaft, no seal. Maintenance free without blockage. Single bearing design. Resistant to scale build up. From the Manufacturer The Laing Pump is installed under the sink or faucet farthest from the water heater - where hot water usually takes the longest amount of time to arrive. A built-in temperature sensor automatically turns the pump on when the water temperature in the hot water supply line cools down to 77º F. This cool water in the hot water supply line is then pumped into the cold water line and back into the water heater. The Laing pump turns off automatically when the hot water supply line to the faucet reaches 91º F, ensuring the instant availability of shower warm water with maximum temperature hot water only seconds behind. When the pump is automatically turned off by the built-in thermostat, an auto closure device prevents hot or cold water from mixing in either supply line.The product should be installed by a licensed professional.