Oregon R50 AdvanceCut Replacement Chainsaw Chain for 14-Inch Guide Bars, 50 Drive Links, Pitch: 3/8" Low Vibration, .043" Gauge, Fits Various Stihl Models

Specifications

About this product

The Oregon AdvanceCut R50 replacement 14-Inch Chainsaw Chain is designed to fit a range of different chainsaw models, and features a 50 drive link chain with 3/8-inch pitch and .050-inch gauge. These specifications make it perfect for homeowners and landscaping professionals who occasionally cut wood, delivering a high standard of durability and performance and all-around ease of use. The durable chrome outer layer and hardened rivets prevent wear and reduce the need for chain adjustments, while the Chamfer chisel cutters enable it to power through timber with an excellent degree of speed. For saw sizes up to 42 cc. This saw chain meets the kickback performance requirement of ANSI B175.1-2012. Features LubriTec - Oregon's next-generation oiling system, designed to extend the guide bar and saw chain life. Compatible with a range of chainsaw models, including, but not limited to: Stihl MS 170, MS 180, and MS 180 C Can be used as a replacement for the following chainsaw chains: Husqvarna H38-50 Stihl 3610 005 0050, 61PMM350E Saw chain identification: Always refer to the number stamped on the drive link of your old chain to assure correct gauge and pitch, or refer to your owner’s manual, to order the correct part to fit your saw chain. • Chain gauge is the drive link's thickness where it fits into the guide bar groove, matching the guide bar gauge • Chain pitch is the size of the chain and is defined as the distance between any three consecutive rivets divided by 2 • Your guide bar length is stated in the manual, and is the length of the long bar from end to tip (not the full length of the chainsaw). See Oregon’s fitting guide.