Premium Screen Replacement for iPhone 7 4.7’ 3D Touch Screen Repair kit (Model A1660, A1778, A1779) Digitizer Display with Back Plate, Waterproof Adhesive, Tools, Tempered Glass, Instruction(Black)

Specifications

About this product

Only for iphone 7 4.7 inch is Not for iPhone 7Plus/8/8Plus, only for model A1660, A1778, A1779 The screen replacement is with back plate and without Ear Speaker, Front Camera, Proximity Sensor, so please swap them out from your old screen and install them. Note: Test it before installation please 1. Do not apply pressure to the corners of the screen panel. 2. Make sure each screw is installed back to its original hole. 3. Be gentle and cautions to the flex cable connectors when installing. 4. Please check the screen and make sure all flex cables are in good condition and there is no debris on the connector. 5. DO NOT over-bend or use excessive force to tear it. 6. Please please disconnect battery flex cable of your phone before you install our new screen, this is very important. Otherwise, it will be easy for your phone to short circuit. Problem Solution If your phone has some problems after installed. For example, cannot turn on, no touch, no home button function, flashing, lines on screen etc., please follow these steps: 1. Reinstall all flex cables from the motherboard and double check all flex cable is in good condition. 2. Restart your phone: Reset the phone by holding both Power and Home button together pressed for min 15 sec, after few mins, turn the phone on. Or reconnect your battery. Package Include: 1 x Screen Assembly1 x High Qulity Repair Tools Set1 x Hardness Tempered Glass1 x Detailed Repair Flowchart1 x Waterproof AdhesiveIf you have any questions or our screen is defective, please don’t hesitate to contact seller before you return it, your issues must be solved in 24 hours. So long as the products cannot work without human factors, we will change new for you freely and make up for your loss. We are in this area more than 11 years. Trust us! .