Ulincos Touch Switch UT19T10 Stepless Dimming Switch, no LED, Suitable for 19mm 3/4" Mounting Hole

Specifications

About this product

What You Get: 1 * Touch Switch 1 * Instruction What's the Touch Switch: Touch switch, just touch it! The touch switch is rated for 7A MAX /DC 6-24V. What's the Touch Switch Used for: Most often the Stepless Dimming switch is used for lights (Such as critical lights, chassis lamp, dome light) About Stepless Dimming type: 1.The light (device) is off when connecting to electricity. Click it (time <550ms) once to initiate it with the light on. Click it again to let it be off. Continue to cycle. 2.The initial brightness is 100% of the maximum brightness. 3.Touch and hold it (time > 550ms) to initiate stepless dimming control. The brightness increases when touching and holding, and stays at the level when stop holding. When holding more than 3 seconds, the brightness reaches and stays at maximum level. The brightness decreases when touching and holding again, and stays at the level when stop holding. When holding more than 3 seconds, the brightness reaches and stays at minimum level. Continue to cycle. 4.Click and Holding Touch can be used anytime. There is no interference between these two functions. What's Note: *The touch switch can't be used on a pump.It will be burnt out easily.*If you meet the static electricity problem, you can let the switch housing be grounded. *The touch switch doesn't work with wet or damp fingers. *The touch switch cannot be used in AC circuit. Don't exceed the rating volts! Specifications: Head diameter: 7/8" ( 22mm ) Mounting hole size: 3/4" ( 19mm ) Depth inc contacts: 1.1" ( 28mm ) Switch Type: Stepless Dimming Input Voltage: DC 6V-24V Output Current: 7A MAX LED color: no LED Enclosure material: Stainless Steel Protection level: IK10 Operating Temperature: -20℃ ～ +55℃